High performance! High accuracy! And High speed!Moreover, this equipment in superb space-saving.

　　General DescriptionThis inspector is high speed and high accuracy for fill level of beverage goods, such as PET bottles, Aluminum cans, Beer in Steel cans, soft drinks, coffee and tea.

　　Because of slim body, it is possible to set it up in the lean space.

　　extremely low X-ray dosage and simple & easy installation and adjustment enabled handy price.

　　FeatureIndustry-leading high speed and high accuracy of inspection(High speed ) Max.2000 bottles/minute(High accuracy)±1mm (at transportation)※it may change depending on use conditions. Achieved overwhelming energy saving compare to same kind products.(Electric power used) 0.5KVA (1/3 of same kind products)(Weight) 20% lighter than same kind products Amount of leakage is under1μSvLeakage of radiation is far below the legal level. So you don’t have to install the X-ray supervisor nor the supervised area.

　　Main specificationsItems of inspectionOver or shortage of the content of filled bottles

　　Detecting rangeThe travelling height at the center of sensor; 65~265mm from the bottom of bottles.The range of up and down setting limit;±7mm from the center of sensor.

　　Accuracy of inspection±1mmwhen waving of the liquid surface is large because of setting places and/or conveyers etc. the accuracy may deteriorate.

　　Speed of inspection2,000CPM Max. Conveyer speed ; Max 150m/min.

　　Electric power supply100VAC±10%, 50/60Hz

　　Allowable ambient temperature 0~40℃(Dew condensation not allowable)

　　ModelLE4-50