检测认证人脉交流通讯录
cast iron wind power generation testing plate
- Wind Power Testing Surface Plate
Wind Power Testing Surface Plate is suitable for Wind power generation company as machining worktable.
Material:
The material of Cast Iron Testing Plate is high-strength cast iron HT200 and HT250. After two times’ artificial heat aging treatment( Artificial annealing temperature 600℃ to 700℃or 2-3 years natural aging) the internal stress was totally eliminated, so the surface plate have stable accuracy and good wear-resisting performance.
Specification:
100*100—3000*6000( Special specification is availiable as per customers’ drawing)
风电试验平台精度:按国家标准计量检定规程执行,分别为0,1,2,3四个等级.
相关产品:风电试验台,风力发电试验平台,风电试验平台
风电试验台制成筋板式和 箱体式,工作面有长方形,正方形或圆形,材料HT200-300,QT400-600,ZG15-45.工作面采用刮研工艺,工作面上可加工V形,T形,U形槽,燕尾槽,圆孔,长孔等.平板是用于工件检测或划线的平面基准量具.风电试验台安装就调至水平板,负荷均匀分布于各支点上.环境温度(20±5)℃.使用时应避免振动.
Wind Powder Surface Plate can be made into rib type or box type and the working surface are typically square, rectangular or round and are allowed to machined V, T or U-shaped grooves and round holes or other holes. It is always used as the datum for measurement of the machinery parts’ geometric tolerance,such as flatness, parallelism, straightness and more. It is also can be used for precision inspection, marking out (layout), and tooling setup. The environment temperature (20 + / - 5 ℃. When using , vibration should be avoided.
