这真不是您需要的服务?
厦门SGS料胶原材料测试、塑胶物理测试、塑料测试标准
Shore Hardness Type A /D |
ASTM D2240-05(2010) |
ISO 868-2003 |
|
邵氏A /D型硬度 |
GB/T 2411-2008 |
ball indentation hardness |
ISO 2039-1:2001 |
球压痕硬度 |
GB/T 3398.1-2008 |
Tensile Strength/ Elongation at break /Tensile Modulus |
ASTM D638-10 |
拉伸强度、断裂伸长率、拉伸模量 |
ISO 527-2:1993/Cor.1:1994 |
GB/T 1040.2:2006 |
|
Poisson ratio |
ASTM D638-10 |
泊松比 |
|
Flexural Strength /Flexural modulus |
ASTM D790-10 |
ISO 178-2010 |
|
弯曲强度、弯曲模量 |
GB/T 9341-2008 |
IZOD Impact Strength |
ASTM D256-10(有缺口) |
ASTM D4812-06(无缺口) |
|
悬臂梁冲击强度 |
ISO 180:2000/Amd 1:2006 |
GB/T 1843-2008 |
|
CHARPY Impact Strength |
ASTM D6110-10 |
简支梁冲击强度 |
ISO 179-1-2010 |
GB/T 1043.1-2008 |
|
Compressive Strength /Compressive Modulus |
ASTM D695-10 |
ISO 604-2002 |
|
压缩强度、压缩模量 |
GB/T 1041-2008 |
Falling Weight Impact Strength |
ASTM D5420-10(Gardner Impact) |
落锤冲击强度 |
ASTM D4226-10(PVC建材) |
Taber Abrasion Resistance |
ASTM D1044-08(透明塑料) |
ISO 9352-1995 |
|
磨耗性能(Taber) |
GB/T 5478-2008 |
Shear Strength by Punch |
ASTM D732-10 |
穿孔剪切强度 |
|
Density |
ASTM D792-08(Immersion) |
密度 |
ISO 1183-1:2004 (Immersion) |
GB/T 1033.1-2008(浸泡法) |
|
Melt index(MI) |
ISO 1133:2005 cor.1-2006 |
熔融指数 |
GB/T 3682-2000 |
ASTM D1238-10 |
|
Flow rate ratio |
ISO 1133:2005 cor.1-2006 C |
流动速率比 |
GB/T 3682-2000 C |
ASTM D1238-10 D |
|
Heat deflection temperature(HDT) |
ASTM D648-07 |
ISO 75-2:2004 |
|
热变形温度 |
GB/T 1634.2-2004 |
Vicat softening temperature(VST) |
ASTM D1525-09 |
ISO 306:2004 |
|
维卡软化点 |
GB/T 1633-2000 |
GB/T 8802-2001 |
|
ISO 2507-1995 |
|
Brittleness temperature |
ASTM D746-07 |
低温脆化温度 |
ISO 974-2000 |
GB/T 5470-2008 |
|
Luminous transmittance |
ASTM D1003-07e1 A |
GB/T 2410-2008 A |
|
透光率 |
JIS K7361-1:1997 |
ISO 13468-1:1996 |
|
Haze |
ASTM D1003-07e1 A |
雾度 |
GB/T 2410-2008 A |
ISO 14782-1999/Cor 1.2005 |
|
Specular gloss |
ASTM D2457-08 |
镜面光泽度 |
ASTM D523-08 |
GB/T 8807-88 |
|
Water Absorption |
ASTM D570-98(2010) |
吸水率 |
ISO 62-2008 |
GB/T 1034-2008 |
|
Chemical Resitance |
ASTM D1693-08 |
耐化学试剂 |
GB 1842-2008(聚乙烯) |
GB/T 2951.41-2008(电缆) |
|
Ball pressure test |
IEC 60695-10-2-2003 |
球压测试 |
GB/T 5169.21-2006 |
Shrinkage from mold dimension |
ASTM D955-08 Type A/ D2 |
ISO 294-4:2001 |
|
模具收缩率 |
GB/T 17037.4-2003 |
GB/T 15585-1995 |
|
Specimen preparation from injection molding |
参考相关材料性能参数 |
注塑加工制样 |