检测认证人脉交流通讯录
ASTM D7031-11 木塑复合材料产品物理力学性能评价指导标准测试
这真不是您需要的服务？
Clause
条款Test Requirement
测试要求Test Standard
测试标准5.5 Modulus of rupture
弯曲模量ASTM D6109 Apparent flexural modulus of elasticity
表观弹性模量ASTM D6109 5.7 Compression Parallel to the L Direction
平行L方向压缩强度ASTM D4761 5.8 Compression Perpendicular to the L Direction
垂直L方向压缩强度ASTM D143 5.6 Tension Parallel to the L Direction
L方向拉伸强度ASTM D4761 5.9 Shear Parallel to the L Direction
平行L方向剪切强度ASTM D143 Shear Perpendicular to the L Direction
垂直L方向剪切强度ASTM D143 5. 10 Creep-Recovery and Creep-Rupture
蠕变恢复和蠕变破坏ASTM D7031 5.11 Mechanical Fastener Holding Test 握钉力 ASTM D1037 5.12 Impact Resistance 落锤冲击 ASTM D4495 5.13 Flame-spread index 火焰传播速度 ASTM E84 Ignition 自燃点 ASTM D1929 5.14 Specific Gravity 比重 ASTM D792 5.15 Moisture Content 水分含量 ASTM D4442 5.16 Slip Resistance 摩擦系数 ASTM D2394 5.17 Abrasion 磨损性能 ASTM D4060 5.18 Thermal Expansion 热膨胀系数 ASTM D696 5.19 Moisture Absorption 吸水率 ASTM D1037 5. 20 Freeze-Thaw Resistance 抗冻融测试 ASTM D7031 5.21 Fungal Decay
抗真菌腐蚀测试ASTM D2017, D1413 Termites
抗白蚁腐蚀测试ASTM D3345 or AWPA Termites and Decay
真菌加白蚁测试AWPA Marine Borers
抗藻类测试D2481 5.22 Leaching
浸出物依化学成分而定 6 Ultraviolet （UV） Resistance Test
抗UV老化（2000小时）ASTM G154 Surface Appearance Changes
老化后表面外观变化- Flexural Property Change
老化后弯曲性能变化ASTM D6109
